A fully concealed door operated switch for hinged or sliding doors, which enables the opening and closing of the doors to operate lighting or other equipment (such as fans).
The Concealed Door Sensor comprises three component parts: a switch sensor, a switch activator disc and a control box. The sensor and activator disc are recess mounted in the door and frame and can be concealed with veneer or paint. The control box can handle one or two sensor/ activator disc combinations to cater for double doors.
Features and benefits
- Switch activator disc requires no connection.
- Switch sensor connected only to control box.
- Control box exterior to furniture requires only SELV wiring in furniture.
- Control box in furniture requires mains power, but can reduce the cable runs to lighting and other equipment.
- Dual output of control box allows separate control of two circuits by either door.
- Control box can be positioned remotely as an actuator for a control system.
Technical
- Rating: two separated circuits, each rated at up to 10A.
- The two Isolated switched output, each having normally open and normally closed options, can be used to switch any connected voltage (including 0-10V signal, on or off).
- Activation zone for sensor by switch activator disc is 12mm.
- Sensor and its wiring are SELV compatible to Zone 0.
- Switch sensor fits into 8mm diameter hole. Switch Activation Disc (5mm deep) fits into shallow 12mm diameter hole.
Product order code
CDS