Multiload Contactor Controller (MCC) accepts a 0-10V signal from a Rotary Push Control (RPC), Multiload Take Control or 0-10V lighting system (eg. MoodMaker) and provides a boosted signal for up to 25 standard drive units, such as LED drivers and fluorescent ballasts.
When the signal is taken below 1V it switches off the mains supply to the load via an internal relay rated at 10A. Any size load can be switched by the addition of a standard mains voltage controlled lighting contactor.
Available as
- Din rail mounted MCC/DIN (pictured). To be used as a building block in systems.
- Stand-alone MCC/SA. Single or multiple MCCs in a stand-alone plastic enclosure.
Features and benefits
- Can be used as a building block in any 0-10V system.
- Uses 2-core cable to carry low voltage SELV compatible signal, which controls both the dimming and switching of a single channel of lighting.
- Allows use of existing cable for easy retrofit.
- Rotation of the RPC Push Control knob dims the lighting smoothly to any brightness level.
- Single push of RPC knob toggles mains switching on/off.
Technical
- Requires connection to the mains which also supplies mains power to the drive units via the on-board relay.
- Rating of relay: 10A.
- For larger loads, an additional mains voltage controlled lighting contactor can be switched by the MCC mains output.
- Additional normally-closed mains output facilitates stand-by lighting and fail-safe connection.
- Input and output 2-core signal cable is SELV compatible.
Product order code
Din rail mounted: MCC/DIN
Stand alone: MCC/SA
Technical information
Installation and operation »
System schematic »