Multiload LampConserver dramatically prolongs lamp life
of all types of tungsten filament lamps, up to 10A rating. Simple installation makes the MLC2500 ideal for both new build and retrofit into existing troublesome installations.
Mains voltage is frequently up to 10% higher than the nominal 230V expected: MLC2500 can reduce this voltage before it gets to the lamps – which greatly increases lamp life (5% reduction doubles lamp life). Payback on lamp replacement alone can be achieved within a year of installation.
Features and benefits
- Totally eliminates surge currents and their fatal effect on tungsten lamps.
- Eliminates nuisance tripping of MCBs and fuses caused by surge currents.
- Increases safety of circuit protection by allowing fuses and MCBs to be rated at nominal current.
- Special voltage control circuitry reduces overvoltage to the lamps, thus greatly increasing lamp life .
- Ideal for pre-setting brightness levels to balance the aesthetic effects of different light sources.
Technical
- Rating: 10A.
- Unique SoftStart circuitry eliminates high surge currents that occur during switch-on or after mains supply interruption.
Available as:
LampConserver MLC2500. Stand-alone – simply wired by interposing between mains switch and load.
LampConserver Dimmer MLC2500DIM with MRM rotary module. Allows lamps to be dimmed and switched by connection of a remote MRM (which has identical features to RPS but uses mains potential 2-core signal for dimming).
- Eliminates irritating acoustic hum, or dimmer buzz, at the MRM wallplate.
- MRM – push on/off 10A switching of mains supply plus separate mains potential control signal.
Product order codes
Standard version:
MLC2500
Dimmer version:
MLC2500 plus
Push Switch rotary:
MRM/XX
(where XX denotes finish)
Technical information
LampConserver MLC2500
Installation and operation »
System schematic »
Technical information LampConserver Dimmer MLC2500DIM
Installation and operation »
Rotary push switch module »
System schematic »