Extremely reliable power supply for linear LEDs which will outlast more than a few generations of LED sources.

 

LED PowerPlant gives a truly stabilised DC voltage for 24V (rating 240W) or 12V (rating 240W) LED sources, which run at their best at the nominal voltage. Other voltage outputs are available on request.

 

Delivers optimum stabilised DC voltage at the LEDs irrespective of mains voltage fluctuations.

 

LEDPowerPlant’s unique electronic sensing circuitry allows it to be positioned great distances from the light sources, solving the problems associated with positioning and concealing power supplies.

 

Exceptionally smooth dimming is achieved by accepting a standard 0-10V signal. An internal relay completely switches off the power to the LEDs when the signal is taken below 1V. This, and remote positioning, greatly simplifies wiring, especially when dimming, and increases safety using only low voltage cable to the light source.

 

It is a true SELV product and is suitable for any sensitive environment where safety is paramount.

 

Features and benefits

  • Flexible positioning - cable runs typically up to 100m:
    • enhanced design options, with clean and uncluttered installations.
    • no need to conceal power supplies near LEDs.           
  • Stabilised DC voltages with an accuracy better than 99%.
  • Achieves the optimum environment for running linear LEDs.
  • Smooth dimming and switching from an industry standard 0-10V signal.
  • Increases installation safety by use of safe extra low voltage cable.
  • All safety standards (SELV).

Technical

  • Unique SoftStart circuitry eliminates high surge currents which occur during switch-on or interruption of the mains supply. 
  • Signalling protocol: industry standard 0-10V.
  • DALI versions available.

Available as

  • Interior (IP20) LEDPowerPlant. 24V and 12V versions with rating of 35W to 240W  
  • Exterior (IP66) LEDPowerPlant. 24V and 12V versions with rating of 35W to 240W 



LED PowerPlant
Product order codes

Low voltage signal version: LEDPP240/24/LVS; LEDPP240/12/LVS

Switching isolated
signal version:
LEDPP240/24/SIS;
LEDPP240/12/SIS

Technical information
Technical specification