Level Select wallplate is a controller for a single-channel of lighting, housed in a single-gang wallplate with various finish options. A rotary knob selects between either one of four preset levels and off (LS4), or one of two preset levels and off (LS2). LEDs on the wallplate indicate the selection.
Light levels are preset on finger-turn adjusters on the back of the plate and are tamper proof once the plate is installed.
Level Select wallplates are wired in 3-core cable carrying an SELV low voltage signal, either to:
- Multiload Analogue Mains Dimmer AD2500 for mains dimmable loads, or
- Multiload Contactor Controller MCC which provides a 0-10V signal to 0-10V drive units for LEDs, fluorescents, etc.
These units switch and isolate the mains supply controlled by the 3-core low voltage signal from the wallplate(s).
Features and benefits
- Individual control and selection of pre-adjusted light levels
for a single channel of lighting. - Hard wired memory, no corruptible software.
- Simple and safe manual adjustment of light levels:
no programming or commissioning. - Preset to set the brightness of the LEDs on the wallplate.
- Preset to set fade time between levels from 1 – 10 secs.
- For use as a system with AD2500 for all mains dimmable lighting and MCC for all 0-10V drive units such as LEDs or fluorescents.
Technical
- Switches 10A when used with AD2500 and MCC
- SELV compatible when using AD2500 and MCC
Product order codes
LS4/XX: 4 levels and off
LS2/XX: 2 levels and off
(where XX denotes finish)
Finishes available
Antique Bronze; Antique Brass; Polished Brass; Polished Stainless; Satin Stainless; Satin Chrome; Black; White; Gold
Technical information
System schematic >