Multiload Take Control (MTC) allows any one of up to four 0-10V signal sources to take control of the dimming and switching of a single channel of lighting; when a signal is changed it automatically routes to the MTC output.

 

Up to four 0-10V Multiload Rotary Push Controls (RPC) can be connected, one to each of the MTC inputs, allowing the lights to be manually controlled from multiple positions.

 

The MTC output is always connected to a Multiload Contactor Controller MCC which provides mains switching and a boosted dimming signal for drive units.

 

When a lighting control system (eg. MoodMaker) is connected

to an MTC input, it can be manually overridden by RPC(s) connected to other inputs.

 

Available as

• Din-rail mounted MTC4/DIN (pictured). To be used as a building block in systems. NB. This option uses a Din-rail mounted MCC
• Stand-alone MTC4/SA. Combined with an MCC in a stand-alone plastic enclosure for individual channels of lighting.
• Dual version. Available as Din-rail (MTC/2DIN) or stand-alone (MTC/2SA). For two channels of lighting with only two signal sources per channel. NB. Requires two MCCs.

Features and benefits

• Allows up to four rotary dimming and switching positions around a room.
• Immediate control from any position.
• Allows any channel of a lighting control system to be manually overridden to any brightness level.
• Can be used as a building block in any 0-10V system.
• Low voltage signal controls both dimming and switching.
• Input(s) and output use 2-core cable to carrying SELV.
• Allows use of existing cable for easy retrofit.
• Single push of RPC knob toggles mains switching on/off from any position.

Technical

• Requires no mains power and is connected only to the signal sources and the MCC.

Product order code
Din-rail mounted: MTC4/DIN
Stand-alone: MTC4/SA

Dual version:
Din-rail mounted: MTC4/2DIN
Stand-alone: MTC4/2SA

Technical information
Installation and operation »