Multiload,

Trailing-edge Dimmer ADT400

TO PLACE AN ORDER OR FOR MORE INFORMATION

Call +44 (0)20 7794 9152

or email sales@multiload.co.uk

Trailing-edge Dimmer ADT400

This Product is now Discontinued.

0-10V controlled trailing-edge dimmer housed in a DIN-rail enclosure. 10W to 400W.

Provides exceptionally smooth dimming of LEDs and other light sources dimmable by trailing-edge phase control.

TECHPACK CONTAINS:

Technical specification and installation
Related product options
Wiring diagrams
Download pdf here

 

PRODUCT ORDER CODE:

ADT400
Trailing-edge Dimmer

  • A DIN rail mounted trailing-edge mains dimmer controlled by a safe 0-10V signal (sink or source)
  • Both dimming and switching functions are controlled via the same 0-10V signal
  • Includes an internal relay to switch off the lighting load
  • Multi-way switching
  • For use with Rotary Push-control Dimmer (RPC), MoodMaker Scene-setting System (MMSU), Take Control (TCU100), and third-party products (see Related Products)
  • When used with RPC dimmer, the wall plate generates no heat, is silent, and there is no requirement to replace existing wiring when retrofitting
  • SELV compatible
  • Housed in a DIN-rail enclosure, ADT400 is mounted in a mains distribution box or enclosure. Lugs are provided for direct mounting into a suitable enclosure
  • Dimming and switching from 0-10V signal input. Dimming 1-10V. Switching, via internal relay, is activated when signal falls below 1V (adjustable)
  • Input circuitry is SELV-compatible (separated or safe extra-low voltage)
  • Multi-way switching capability
  • Global on/off provided for PIRs, master switches etc.
  • In a retrofit situation when, for example, a switching installation is to be replaced by a RPC Dimmer and ADT400, it is possible to use existing wiring.
  • The unit is suitable for mains-dimmable LEDs, mains-voltage incandescent lamps, quality low-voltage transformers dimmable by trailing-edge phase control, mains halogen lamps
  • Wiring diagrams are available in the TechPack

Rotary Push-control Wall Dimmer (RPC series)

Enables 0-10V rotary dimming and switching. RPC Push-control Dimmer fits or clips into wall plates and grid systems from UK wall-plate manufacturers.

  • When used with one ADT400 (RPC1) or more ADT400s (RPC2), switching and dimming is possible using only 2-core cable. Allows easy retrofit dimming, avoiding the need to chase walls, and produces no heat or noise at the wall plate
  • Wiring diagrams can be found on pages 3 and 4 of the TechPack
  • More information on RPC series can be found here

Take Control (TCU100 and TCR)

Allows up to four Take Control Rotaries to be positioned around a room or building, with each seamlessly taking control of switching and dimming.

  • When used with ADT400 it allows up to four Take Control Rotaries (TCR) to each switch and dim a lighting circuit requiring trailing-edge dimming
  • A wiring diagram can be found on page 5 of the TechPack
  • More information on Take Control can be found here

MoodMaker Scene-setting System

Multi-channel scene-setting system with up to four scene-select Wall Plates, each with a choice of six scenes (four moods plus full ‘on’ and ‘off’) for any number of lighting channels or circuits

  • The 0-10V signal output from a MoodMaker channel to one or more ADT400s can be used to dim and switch a lighting circuit requiring trailing-edge dimming
  • A wiring diagram can be found on page 5 of the TechPack
  • More information on MoodMaker can be found here

Lighting Control Systems

Can be used with any lighting control systems or products providing 0-10V signal control outputs

  • When used with third-party lighting control systems which provide a 0-10V control signal, dimming is provided over the control range from 1-10V and switching is activated when the signal is below 1V

click to enlarge